What can I expect after Angioplasty and Stenting? : Best Heart Hospital in India

Am I a candidate for Angioplasty and Stenting?

You may be a candidate for angioplasty and stenting if you have moderate to severe narrowing or blockage in one or more of your blood vessels. Usually, you will also have symptoms of artery disease, such as pain or ulceration, in one of your limbs.

If you have extremely hard plaque deposits, blockages that contain blood clots or a large amount of calcium, extensive or particularly long blockages, blood vessel spasms that don't go away, or complete blockages that cannot be crossed with the catheter, you probably are not a good candidate for angioplasty.

Am I at risk for complications during Angioplasty and Stenting?

Complications to angioplasty and stenting may include reactions to the contrast dye, weakening of the artery wall, bleeding at the access puncture site in the vessel or the angioplasty site, re-blocking of the treated artery, and kidney problems. Additionally, blockages can develop in the arteries downstream from the plaque if plaque particles break free during the angioplasty procedure. If severe, these can lead to worsening of the blood flow.

If you have diabetes or kidney disease, you may have a higher risk of complications from the contrast dye, such as kidney failure. In the case of kidney disease, sometimes pre-treatment with medications or fluids may decrease the impact on your kidneys.

People with blood clotting disorders also may have a higher risk of complications from the procedure. If the plaque deposits in your arteries are especially long, you may have a greater chance of your artery closing up again after angioplasty and stenting.

What happens during Angioplasty and Stenting?

Your physician will usually insert the angioplasty catheter through a small puncture point over an artery in your groin, your wrist, or your elbow. Before the insertion, he or she will clean your skin and shave any hair in the immediate area. This is done to reduce your risk of infection. Your physician numbs your skin and then makes a small cut or puncture to reach the artery below. Although you may be given some mild sedation, your vascular surgeon will usually want you to stay reasonably alert to follow instructions and describe your sensations during the procedure.

Your vascular surgeon then inserts a guide wire or a guide catheter into your artery. Using a type of x ray that projects moving pictures on a screen, your physician guides the catheter through your blood vessels. Because you have no nerve endings in your arteries, you will not feel the catheters as they move through your body.

Next, your vascular surgeon will insert a balloon catheter over the guide wire or through the guide catheter. The balloon catheter carries a deflated and folded balloon on its tip. Your vascular surgeon guides the balloon catheter to the narrowed section of your artery. He or she partially inflates the balloon by sending fluid through the balloon catheter.

Your vascular surgeon watches the x ray screen for signs of a pinch in the balloon. Then, your vascular surgeon will inflate the balloon more, until the pinch caused by your artery flattens out. When the balloon is full, your vascular surgeon may deflate and re-inflate it repeatedly to press the plaque against your artery walls. Usually, this process takes a few minutes. Sometimes, if you have a severe blockage, your physician may need to inflate and deflate the balloon longer.

Your artery may stretch and your blood flow through the artery stops when the balloon is pushing your artery open. This may cause pain. However, the pain should go away when your vascular surgeon deflates the balloon and normal blood flow resumes. Make sure to tell your physician if you experience any symptoms during angioplasty.

There is a risk that your artery will re-narrow or become blocked again at the site where the balloon was inflated. This can happen soon after the procedure, or months to years later. Re-narrowing of your artery is called restenosis, and if your artery suddenly becomes blocked again it is called re-occlusion. Restenosis can happen when scar tissue builds up inside your arteries where the balloon compressed your plaque deposits.

After angioplasty, your vascular surgeon will sometimes need to use a stent to brace the artery open to prevent re-occlusion. A stent is a tiny mesh tube that looks like a small spring, and comes in a variety of sizes. To place a stent, your physician removes the angioplasty balloon catheter and inserts a new catheter. On this catheter, a closed stent surrounds a deflated balloon. Your vascular surgeon guides the stent through your blood vessels to the place where the angioplasty balloon widened your artery. Your physician inflates the balloon inside of the stent. This expands the stent. Your physician then deflates and removes the balloon. The stent remains in place to support the walls of your artery. Your artery walls grow over the stent, preventing it from moving. Although stents help prop open your arteries, scar tissue sometimes can eventually form around stents and cause restenosis.

A new type of stent is coated with drugs. These drugs may help prevent scar tissue from forming inside a stent. Studies have shown that these new stents may be more likely to prevent restenosis than ordinary, non-coated stents. In the United States, physicians currently use drug-coated stents in coronary arteries (the arteries supplying the heart). Experts are still testing drug-coated stents for use in other arteries.

Once your vascular surgeon finishes angioplasty and stenting, he or she removes all of the catheters from your body. If blood-thinning medications have been used, your physician may leave a short tube, called a sheath, in your artery for a short time until the medications have worn off sufficiently to allow the puncture site to seal over when the sheath is removed.

Eventually, your physician removes the sheath and presses on the puncture area for 15 to 30 minutes to prevent bleeding. Sometimes, instead of pressing, your physician may close the area with a device that functions like a tiny cork, or he or she may use stitches.

Angioplasty and stenting usually takes between 45 minutes and 3 hours, but sometimes longer depending upon the particular circumstances.

What can I expect after Angioplasty and Stenting?

Usually, you will stay in bed for six hours after your angioplasty. During this time, your vascular surgeon and the hospital staff closely monitor you for any complications. If your physician inserted the catheters through an artery in your groin, you may have to hold your leg straight for several hours. Similarly, if your arm was used, then you will need to hold it still to minimize the risk of bleeding.

If you notice any unusual symptoms after your procedure, you should tell your vascular surgeon immediately. These symptoms include leg pain that lingers or gets worse, a fever, shortness of breath, an arm or a leg that turns blue or feels cold, and problems around your access site, such as bleeding, swelling, pain, or numbness.

After you return home, your vascular surgeon will give you instructions about everyday tasks. For example, you should not lift more than about 10 pounds for the first few days after your procedure. You should drink plenty of water for 2 days to help flush the contrast dye out of your body. You can usually shower 24 hours after your procedure, but you should avoid baths for a few days.

Your physician may prescribe aspirin or other medications that thin your blood. These medications will help prevent clots from forming on your stent. Your physician may also ask you to follow an easy exercise program, like walking.

You will be asked to schedule a time to see your physician after the procedure. At this appointment, your physician may check your blood to make sure your medications are at the right dosage. He or she may also use tests to see how blood is flowing through your treated artery.

Are there any complications?

Serious complications are unusual following angioplasty and stenting but, nevertheless, can occur.

Less serious complications include bleeding or bruising where your vascular surgeon inserted the catheters. Sometimes, the hole created by the catheter does not completely close. This can create a false channel of blood flow. Rarely, an abnormal connection can form between an artery and a vein at the place where the catheter was inserted. These problems usually go away. However, if you have any serious symptoms, your vascular surgeon can treat you.

You may have an increased risk for blood clots forming along your stent, especially in the first month after your procedure. To reduce this risk, your physician may prescribe medications that thin your blood.

As more time passes after your angioplasty and stenting, restenosis becomes more likely. Stents, especially drug-coated stents, may reduce this risk. However, in some cases, you may need a repeat angioplasty or a bypass surgery if a restenosis develops.